MATO Corporation
                                   Conveyor belt fasteners

Medium Duty Conveyor Belt Lacing Systems
Medium Duty Belt Systems include:

.  Bolt Plate Fastener System MS
.  Comet System
.  GEM ELR System
.  Hammer System U20
.  Hammer System H20


Comet System MP20
Fastener for PVC Belts

The MATO Wire System MP20 designed for use in PVC belts up to 800 kN/m or 500 P.I.W belt strength. The main applications are:

.  Coal Mining
Lacing tool for this product
Connecting pins for this product
Skiver for this product

.  Industry
Belt strength in kN/m
Belt strength in P.I.W
up to 800
up to 500
up to 800
up to 500
Belt thickness in mm
8-11
8.5-14.5
Fasteners:
 
 
Series standard
MM12
P14
Connecting pins:
 
 
Zinc plated cable
L1
L2
Stainless steel cable
L1S
L2S
Diameter in mm
5.3
6.4

Belt Lacing Tools
To Suit MP20

Manually Operated Screw Lacer
.  The full splice width is installed progressively by pressing in 76mm long strips of fasteners.
.  The force transmitted through the lacer ensures high pressure at the lacer jaw, which is necessary to squeeze the fasteners and correctly embed them into the belt.
.  Special packing plates are available which are fitted behind the jaws for belts less than 8mm thick.

Bolt Plate Fasteners
System MS

MS Series

Belt Lacing and Repair Systems. The MATO Screw system can be used for belt splicing and rip repairs. The systems offers:

.  High compression in the belt (vice like effect)
Lacing tools for this product

.  Easy Installation.
Fastener
size
Belt
Strength
P.I.W
Belt
thickness
inch
Min. pulley
diameter
inch
Material
No. of
fasteners
/box
No. of
fasteners
/bucket
Splice
width
/box
mm
Steel
Hardened
steel
 
1
140
190
1 1/2
2
2 1/4
2 1/2
160
220
330
300
450
620
450
3/16"-7/16"
3/16"-7/16"
5/16"-9/16"
7/16"-11/16"
9/16"-13/16"
9/16"-1 3/16"
3/4"-1"
12"
14"
14"
18"
30"
36"
42"
.
.
.
.
.
.
.
.
.
.
.
.
.
25
25
25
25
25
25
10
100
100
100
100
100
100
100
30"
30
30"
36"
40"
40"
20"

Belt Lacing Tools
To Suit MS

.  The installation templates are available in a range of belt sizes
    30", 36", 42", 48" and 54"
Hand Nut Tightener
.  Useful in confined areas.
Brace Nut Tightener
.  A complete range of tools is available including power tools.
Belt Punch
.  For punching out the bolt holes. The punched out belt plugs are
   ejected through the punch.
Bolt Breakers
.  Used in pairs to break off the surplus length of bolts.

GEM 103/110 ELR System
Fastener for Industry

ELR

The MATO Wire System ELR is designed for use in PVC belts up to 800kN/m belt strength. The main applications are:

.  Coal Mining
Lacing tool for this product
Connecting pins for this product
Skiver for this product

.   Industry
Belt strength in kN/m
up to 800
Belt thickness in mm
8-12
Fasteners:
 
Series standard
GEM 103/110 ELR
Connecting pins:
 
Zinc plated cable
L2
Stainless steel cable
L2S 
Diameter in mm
6.4

Belt Lacing Tools

To Suit ELR

Manually Operated Lever Lacer.
.  The portable GEM Splicing machine is available with a comb
   pitch of 7mm. The lacer is lightweight and easy to carry to the
   job site, set up and use to install the GEM ELR fastener.
.  Our standard machine is suitable for 230mm comb lengths, and
   can be manufactured to suit 460mm comb widths. (Available on
   special request only.)

Hammer System U20
Fastener for Industry and Agriculture

Hammer System U20

The MATO Hammer System U20 is designed for use in belts in the thickness range of 4-7mm. The system is particularly suitable for operation on small pulleys and offers extremely long service life. The main applications are:
Connecting pins for this product
Skiver for this product

.  Agriculture.
.  Specially for splicing round hay baler belts.
.  Industry.
Belt strength in kN/m
up to 450
up to 450
up to 450
Belt thickness in mm
4-5
5-6
6-7
Fasteners:
 
 
 
Series
U24AS
U24BS
U24CS
Connecting pins:
 
 
 
Zinc plated cable
K1
K2
K2
Armoured cable
O1K
O2K
O2K
Diameter in mm
3.0
3.3
3.3

Hammer System H20

Fastener for Industry and Agriculture

Hammer System U20

The MATO Hammer System H20 is designed for use in belts in the thickness range of 5-7mm. The system is particularly suitable for operation on small pulleys and offers extremely long service life. The main applications are:

.  Agriculture.
.  Specially for splicing round hay baler belts.
.  Industry.
Belt strength in kN/m
up to 450
Belt thickness in mm
5-6
Fasteners:
 
Series
H24BS
Connecting pins:
 
Zinc plated cable
K2
Armoured cable
O2K
Diameter in mm
3.3

Connecting Pins
To Suit Medium Duty Fasteners

LS
.  Low cost wire    version:
   - Stainless steel      cable
K
. Flexible connecting pins   available in coils 10 or   30m long.
. Zinc plated spring steel

 
L
.  Low cost wire    version:
   - Zinc plated      cable
OK
. Flexible connecting pins   available in coils 10 or   30m long.
. Armoured cable (wear   resistant).

Accsessories For Lacing machines

Hammer Pin Driver

.  Using the hammer pin driver the MATO connecting pins can be
   installed easily and without damage.

Screw Pin Insertion Tool

.  Manual insertion tool for screw connecting pin.
   The screw connecting pin can be installed quickly and easily.

Screw Pin Insertion Tool

.  Pneumatic insertion tool for screw connecting pin.
  The screw connecting pin can be installed quickly and easily.


Accsessories

Hand Skiver

.  This skiver is a quick and easy tool for rebating the belt, allowing
   the fasteners to lie flush with the belt surface. This reduces wear
   between fasteners and scrapers resulting in longer lifetime of both.

Handsaver

.  Provides a safe and comfortable method of handling awkward
   objects and saves trapped fingers and cut hands.
.  Flats, channels, angles, tubes, rounds, H sections, conveyor
   belting may all be lifted and dragged easily, safely and quickly.
   with this versatile tool
.  Corrosion resistant finish.

Belt Marker Belt Knife
Belt Marking Pen-Silver